NEYOCHEM TIRE AND DASHBOARD POLISH SILICON EMULSION

7,000

Clear

Product Description

NEYOCHEM Tire & Dashboard Shine Polish emulsions NC-TP are nonionic oil-in-water-emulsions consists of mix Dimethyl Siloxane, give high Gloss and good adhesion to variety of surfaces. The silicone oil phase is compatible with many organic finishing agents (Paints/Coatings/Adhesives)

NC-TP contains high performance active agent with mix Poly Dimethyl Siloxane. The active agent contained supports an easy polishing of the conditioner formulations and improves the brightness. Due to the presence of active agent in emulsion polish film adheres extremely well to the substrate surface, which results in that gloss and depth of image are retained for longer period of time. High performance active agent also acts as corrosion inhibitor for metallic surface.

NC-TP emulsions can be used as release cum shine agents for rubber articles. They are also acting as good hydrophobic agent for molded / treated substrate.

Solid Content Appearance Viscosity cps @ 250C pH of neat Specific Gravity
28% to 60% Milky White Paste Viscous Liquid and Paste 6 – 8 0.97 – 0.99

Typical Values – Should not be considered as specifications.

Features

  • Non - Corrosive
  • Non-Reactive
  • Effective at lower concentrations
  • Effective at wide range of temperature
  • No smoking, breakdown, carbonization, buildup on molds and dies
  • Surface becomes abrasion resistant and Hydrophobic
  • Good emulsion stability
  • Due to active agent shine retained for a longer period of time

How To Use:

NC-TP is usually applied from dilute solution. Solutions are prepared by diluting distilled pure water and stirring the mixture gently until it uniforms. The extent of dilution will depends on the surface to be treated and surface properties desired. Care should be taken that the dilution remains acidic as alkaline PH will lead to evolution of hydrogen.

Shelf Life

Six months in original container.

Storage & Handling Precautions

It is recommended that normal safety precautions (hand gloves & safety goggles) be taken while handling the product. The material should be stored in original containers in a cool place and protected from direct exposure to sunlight.Product safety information required for safe use is not included. Before handling, read Material Safety Data Sheets (MSDS) and container labels for safe use, physical and health hazard information.